1980s Soda Bottle Cap Magnet Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw in mount for older metal soda bottle caps so you can display the caps
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
A screw in mount for older metal soda bottle caps (last seen in the USA in the late 1980's) so you can display the caps on your fridge or other metal objects.
Has 3 holes for more magnets if you see fit, however I only use 1 magnet in the center hole. I use a pair of needle nose pliers in the two outer holes to torque the mount into the cap for an extra snug fit (see picture #7).
Printed using PLA and 10% infill and supports (see picture #9 for Cura support settings). If you print the supports right, you can easily uncoil them for a perfect print (see pictures #2 & #3).
Requires 6mmx2mm magnets (actual dimensions 6mmx~1.7mm) Amazon item #B079FLRQJP. (see picture #10).