PTFE Push-to-Connect Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.46 – €0.56 net (excluding VAT)
For file: Sovol Filament Dryer Glands_0.2mm_PETG_MK3S_35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.51 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 35.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Allows you to add a PTFE push-to-connect adapter to anything.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 39
- Makes
- 0
- Views
- 370
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to add some PTFE push-to-connect adapters to my filament dryer. This was what I came up with, and it works great. You will need to drill a hole to allow the filament guide to pass through along with a hole for the faster to bind the two portions.
Tips
- Slice the 3MF yourself for the best results.
- They are designed around a 3mm female push-to-connect fitting.
- I used M3 fasteners to hold mine together. You don't need to use the aluminum grommet, either.