HelloBaby Baby Monitor Ramp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ramp to get the perfect angle for the HelloBaby Baby Monitor
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 87
- Makes
- 0
- Views
- 712
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have the HelloBaby HB6650 Baby Monitor (Amazon link). While it has pan/tilt functionality, when I put it on a high shelf, it can't see below the shelf very well. This ramp tilts it forward to get a better angle for the crib.
The ramp is designed to be used with the provided wall mount to attach the camera, but only wall screws are provided. Instead, I used 2 M3 8mm screws + nuts. I believe M4 should also work, but haven't tested it with those. The holes in the wall mount are tapered, but there's enough clearance to use non-tapered screws
I also plan on using removable Command strips to attach it to the shelf to make sure the camera doesn't fall forward. The current model is at a 22.5 degree angle, which works for us, and doesn't topple over on its own, but it's better to be safe! If you need a steeper angle, please let me know.