1 / 3
Orbiter Filament Sensor 2020 Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount the Orbiter sensor to a 2020 extrusion.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 28
- Makes
- 1
- Views
- 690
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Use this on a printer using 2020 extrusions if you use the Orbiter extruder and, like me, don't/can't have the filament sensor mounted on the extruder. There's a version with or without a cutout for the standard Voron 3mm panels.
Print settings
My settings:
- nozzle: 0.4 (100% line width, so 0.4)
- layer height: 0.2
- top/bottom layers: 4
- walls: 4
- infill: 20% gyroid
- supports: no
- filament: any normal structural material will do
Adjust your settings if needed based on your preferred print setup.
BOM
- 2 x M3 6mm-20mm SHCS or BHCS (any length in range will work)
- 1 x M3 10mm
- 1 x M3 'hammerhead' or T-nut
- 4mm OD bowden tube
Assembly
Sensor housing bolts thread into the mount, so don't bolt/unbolt them too many times. Best to test your sensor before you mount it. The bowden tube should fit snugly in the hole and the bolts should thread in without too much force.