1 / 4
Zipper Pull - Pac Man Series (Baby Ghost)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Smaller version of @TheWhatBrandSG's model, scaled to 80% and remodelled.
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 117
- Makes
- 3
- Views
- 703
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original felt too big for the zipper on my backpack, so I made a smaller version.
Everything is adjusted to use the same 4mm paracord and 3x2mm magnets. The magnets should be easy to install by putting them one by one on a flat surface and pressing the print onto them from above.
Items you need:
- Two pieces of paracord, 3-4 mm in diameter
- 4x 3x2mm magnets
- 2x 10mm wiggly eyes
- Super glue for the eyes
No supports are needed. For best results, variable layer height is recommended, this way the sides will look more uniform. Feel free to use the included .3mf / .gcode files.
F3D and STEP files are also included.