Klippermate load spreader
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
mod Klippermate for badminton stringing with original plate clamp, the racket can slip sideway when cross string is pull
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
printed using PETG
mod Klippermate for badminton stringing, replaced the 2 clamp plates
with original plate clamp, the racket can slip sideway when cross string is pull
also, the new clamp also make stringing easier as grommets at the center are more visible
I also filed the sides of pillar bolt so it doesn't scratch the string when releasing the racket
the top clamp is just for holding the bracket and shall not be screw too tight as it might damage the racket
after stringing, the racket grab tight to the load spreader, need to raise the racket slowly and evenly out of the bolt