Articulated foot for camping seats | Beweglicher Aufsteckfuß für Campingsstühle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Articulated print-in-place foot for camping chairs | Beweglicher print in place Fuß für Campingstühle
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 49
- Makes
- 1
- Views
- 299
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Camping chairs often sink in sand or loose ground. Mine didn't have disc feet, so I made some that would work in sand and on uneven ground.
The feet is pushed onto the existing rubber feet with a little force. It fits on rubber feet with a maximum diameter of 20mm at the widest point and sits firmly.
The feet consist of two movable parts and can be printed in place in STL orientation with 3-4 outer layers and at least 30% infill.
— I would be very happy if you have as much fun with the things as I do. —
If you like
:-) Thank you very much!
--- German description ---
Im Sand oder bei losem Untergrund sinken Campingstühle häufig ein. Meiner hatte keine Tellerfüße, so dass ich welche gemacht habe, die sowohl im Sand als auch auf unebenem Untergrund funktionieren.
Der Fuß wird mit etwas Kraft auf die vorhandenen Gummifüße gesteckt. Er passt auf Gummifüße mit max. 20mm Durchmesser an der breitesten Stelle und sitzt fest.
Die Füße bestehen aus zwei beweglichen Teilen und können in STL-Ausrichtung mit 3-4 Außenschichten und mindestens 30% Infill print in place mit 0,2 mm Schichthöhe und ohne Support gedruckt werden.