Seed Starting Set V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A complete seed starting set with an optional bottom tray.
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 275
- Makes
- 0
- Views
- 1,724
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Standard Digital File License
This is a major update to my original seed starting trays. I made a 2x2 model, added a base tray to go underneath a set of 4, and most importantly added some supporting structures for much better printability.
A full set would be 4 of the seed starting trays and one of the base trays. They have holes at the bottom for poking out the soil blocks and vents on the corners for air pruning.
I recommend printing in PETG, ABS, or ASA so that they will be more usable outdoors. Supports are required. Print with 2 perimeters. Layer height and infill do not particularly matter, but I use 0.2mm layer height to speed up the printing a bit versus 0.15mm.
Let me know if you run into any problems and I'll see what I can do!