Collapsible horns
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Curved cosplay horns that collapse for travel or storage
- Rating
- 4.833 / 5
- Likes
- 348
- Downloads
- 741
- Makes
- 6
- Views
- 3,325
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution
Print-in-place, collapsible horns for cosplay. Collapsed, these are about 80mm tall with a base of around 90mm in diameter for easy transportation. Each segment can be oriented independently to give a variety of different looks. There are places for four 8mm magnets in the base as well as slots for adding elastic or other straps, or just cut a hole and use the base flange to hold it in place.
I recommend adding “fuzzy skin” (Prusa Slicer) or the equivalent in other slicers to give the outer texture shown in the images. The examples above were printed with a 0.6mm nozzle, 0.4mm layer height (to go along with the fuzzy skin for a rough, organic look), 4 perimeters, zero percent infill and no supports.
Note that the pieces are held together by friction, so paint will likely rub off of the surface with time and usage.
2023-12-08: Added revised 65mm horn with a base that should conform better to the shape of your head. The revised version also stays together better when collapsed so the individual segments won't (usually) come apart.
2024-06-08: Adding STL version of 65mm.