KIK and Mortise Lock Holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
KIK and Mortise Lock Holders for locksport and lockpicking. Designed to make holding cylinders easier while picking.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 181
- Makes
- 1
- Views
- 839
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Lock holders for KIK and Mortise cylinders. Rim cylinders will not fit.
8 flat sides for grip and putting in a vise.
Print tolerances are loose for manufacturing differences. M3 screws may need to be screwed in the holes provided to remove any wobble. The holes are sized to be self tapping. The holes in the kik adapter line up with the holes in the mortise holders. Be aware screws can damage threading on the mortise cylinders. You may consider using nylon screws to prevent damage or scratches. I thought about moving the screw hole towards the lock face more, but I thought it would get in the way when holding it and opted not to.
Left handed users can mirror the parts if they would like to flip the position of the screw holes.
Holes internal to the mountable mortise holder are for mounting to a surface with M3 screws and nuts. There is a cutout on the bottom for optionally adding a magnet. A mounting plate could also be made for the holder to simply slide into using the screw holes, maybe an “add on” one day.
Tailpieces may have a limited rotation in the mortise holders compared to normal. See the image of the open CI practice cylinders for an examples.