Rep Fitness FT-5000 Function Trainer Olympic Weight Peg for Fractional Weights
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Weight Peg to hold small fractional weights to be used with a GymPin
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 468
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to design something to get some weights off the ground since there were some people who worked out who weren't able to go up between different weights on the weight stack on my Rep Fitness FT-5000 function trainer. So I designed this simple weight peg to be used to hold some fractional weights. I'm using a GymPin in order to make incremental changes in weights.
I would print with the top side down and use supports on the weight peg portion. There is a slight upward angle on the weight peg to prevent the weights from sliding. Since its only holding a few lbs doesn't need to be that strong, I used 6 walls with 25% infill and printed in PLA.