IKEA Foodbox Drybox Remix
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.75 – €2.14 net (excluding VAT)
For file: Ingredients for a box with straight outlet without humidity sensor / dryboxingredientswithoutsensor_015mm_pla_mini_2h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.94 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 2.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
DryBox for two spools made from IKEA food storage box.
- Rating
- 4.857 / 5
- Likes
- 218
- Downloads
- 646
- Makes
- 15
- Views
- 7,905
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of this model by crashdebug from thingiverse.
I changed the inside roller mountings to 10mm diameter to fit 10mm aluminium rods instead of M8 threaded rods and constructed new outlets with only 3 screws and PC4-M10 connectors because they have less friction than the small ones…
I got my aluminium rods here. And the boxes from IKEA. For more links and description see original on thingiverse.
You will need adaptors to mount spools on the rod. I made them for Prusament here and Primaselect PVA here. Both a parametric designs so you can easily adjust them to other filament brands.
The mounting for the hygrometer is from the original - no change there.