Honeycomb Bookend
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.84 – €4.70 net (excluding VAT)
For file: Book End (Honeycomb)_0.3mm_PLA_MK3S_3h51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.27 excluding VAT (range midpoint).
- Weight reported by the author
- 62 g
- Print time reported by the author
- 3.86 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple bookend with a honeycomb design created using the modifiers in PrusaSlicer. My first upload!
- Rating
- 3 / 5
- Likes
- 109
- Downloads
- 533
- Makes
- 2
- Views
- 2,966
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The 3d view doesn't show the honeycomb pattern as it was created with the PrusaSlicer modifiers, so you'll need to slice it to see the finished look. The border around the honeycomb section is slightly raised, so it requires a small amount of support material that is easily removed.
If you have any problems printing the model, please make sure the infill pattern is set to honeycomb and supports are turned on everywhere.
This is my first design upload, so if you have any constructive criticism for future designs, please let me know! All the best, hope you enjoy :)