60deg Angled, Tall Prusa MK52 Heated Bed Cover (for Thicker Cables/Terminals)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A taller heated bed for those who uses ring terminals with thick insulation and/or thick cables.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Designed specifically in cases where your cable connections to your MK52 heated bed is tall - in my case due to a combination of using a slightly thicker cable and using ring terminals with a really thick insulation layer.
This cover is designed with a height gap between the bed and the ceiling of the cover itself being 8mm tall (vs the usual ~3mm gap in original heat bed cover). Do take a measurement after you dry fit your heated bed connectors before your decide to print this and determine that it suits your need.
Other parts that you need:
- M3 hex nut
- M3 15mm mechanical screw
- 1 2-3mm zip tie that is at least 10cm long (I personally use a 15cm one and cut off the excess)
Print with the top of the cover facing down towards the bed.