Wall,- & Skadisadapter [for original MK4 Spoolholder]

To reduce vibrations during prints, I wanted a simple way to mount the mk4 filament spool holder onto the wall or skadis wall.

When using the Skadis adapter, i recommend using the additional “skadis_wallmount_standalone” (see picture)

In order to still be able using the original mk4 filamentguide, you can use:

https://www.printables.com/de/model/641003-standalone-adapter-for-original-mk4-filamentguide

Its screwed in place with 4x60mm spax screws.

This adapter then will fit a standard D=190mm filemant spool.

Technical Data:

• mount with 2x spax [4x60mm]
• working with a D=190mm standard filament spool

Print Settings:

• 0.2mm layer height
• no supports needed
• at least 30% infill for the wall adapter
• im using 70% infill for the skadis adapter with 100% in the hook area (see pictures)
• i've printed with normal PLA

I'm using it together with when using cardboard rolls:

• https://www.printables.com/de/model/622681-cardboard-filamentspool-adapter-mk4-upgrade