Coffee Bean Funnel for Weber Workshops Polymer Bean Vaults
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Funnel designed to fit the opening of Weber Workshops Polymer (Resin) Coffee Bean Vaults, for easier vault filling.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 106
- Makes
- 3
- Views
- 622
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Funnel designed to fit the opening of Weber Workshop's Polymer (aka Resin) Bean Vaults. Fits some other designs as well; outside diameter is 28mm at the bottom, and 60mm at the top.
New design (Sketchup File included) inspired by this one, but taller and wider to prevent spilling beans when filling.
** Updated 14-Dec-2024:
** Added Version2, which adds a horizontal lip to the top. This provides better bed
** adhesion for printing, and an easier way to grip the funnel when using it. STEP file
** also included.
V1: Print in orientation provided (upright), no supports required. I used PETG on a Satin PEI sheet, and it stayed adhered just fine despite the small contact area. But if your combination of material and bed have low adhesion, just add a brim.
V2: Print in orientation provided (inverted), no supports required, the included lip should provide good bed adhesion.