SoloKeys Solo 1 USB-A Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement case for the USB-A version of the Solo 1.
- Rating
- 4.5 / 5
- Likes
- 3
- Downloads
- 39
- Makes
- 2
- Views
- 231
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
The rubber case of my Solo 1 developed a split, so I looked for a replacement. I found one, but it was for the USB-C version, so I tweaked it for the USB-A version I had. I also added a loop so it could be attached to a keyring.
The body was reworked in OpenSCAD. OpenSCAD wouldn't work with the lid, though, so I fixed it up with some modifiers in PrusaSlicer. Likewise, the original button was too tall, so I shrunk it in PrusaSlicer. If you download the .3mf file, you'll get all three parts, ready to print.
The SoloKey*.stl files are the original USB-C version without a loop.