Fan holder with BLTouch for KP3S / Držák ventilátorů s BLTouch pro KP3S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan holder with BLTouch for KP3S / Držák ventilátorů s BLTouch pro KP3S
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
English
Fan holder for KP3S printer is projected to easy print print.
This model has two variants - with or without pad under BLTouch. In any models of KP3S is necessary to use the pad to optimal settings of BLTouch from bed. You must try it.
The difference between models with or without pad is, that model without pad has a holder for BLTouch 2 mm lower - in this variant you don't need print the pads.
Printing:
Supports: only on bed
Material: PETG or ABS
Material:
1 pcs of fan 40x40x10 / 24V
1 pcs of stock blower fan /24V
4 pcs of screw 3x15 mm
1 pcs of BLTouch (I use 3DTouch)
2 pcs of screws 3x15 mm
2 pcs of nuts M3
Upgrade 2024-02-06:
I added blower to 40x40 fan reduction, to be able variable connect two fan 40x40.
Česky:
Držák ventilátoru pro tiskárnu KP3S je navržen pro snadný tisk.
Tento model má dvě varianty - s nebo bez podložky pod BLTouch.
U všech modelů KP3S je nutné s nebo bez podložky optimálně nastavit výšku BLTouch od podložky. Musíte vzdálenost sami zkusit změřit.
Rozdíl mezi modely s nebo bez podložky je ten, že model bez podložky má držák na BLTouch o 2 mm nižší - u této varianty nepotřebujete podložky tisknout.
Tisk:
Podpěry: pouze od podložky
Materiál: PETG nebo ABS
Ostatní materiál:
1 ks ventilátoru 40x40x10 / 24V
1 ks zásobní dmychadlo /24V
4 ks šroub 3x15 mm
1 ks BLTouch (používám 3DTouch)
2 ks šroubů 3x15 mm
2 ks matic M3
Upgrade 6.2.2024
Přidal jsem redukci z bloweru na ventilátor 40x40, aby bylo možno jako variantu použít dva ventilátory 40x40.