1 / 1
Ryobi Bs904g Bandsaw Leveling Knob
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The teeth on the stock leveling lever can wear down, this is a replacement.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The teeth on the stock leveling lever can wear down, this is replacement in the form of a regular knob. You may even want to give it a go even if your stock lever is fine, this is much easier to use.
Take of the original lever, and push this on. Recommend to hold it on with a washer and M4 bolt.
Optionally use some loctite on the teeth to make sure it has no chance of slipping (unlikely).
I printed it with PLA 35% infill.