1 / 2
Stackable Amiibo / Figure Display Shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stackable shelf for displaying Amiibos or Mini Figures
- Rating
- 5 / 5
- Likes
- 112
- Downloads
- 409
- Makes
- 2
- Views
- 2,299
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
(20th Oct 2025) Updated with slight design changes available here:- https://www.printables.com/model/1451045-blokeesamiibofigure-stackable-display-shelf-v2
This is a stackable shelf I made for putting my Amiibos in a vertical tower to save space instead of a tiered staircase.
The shelf height is 100mm from base of one level to bottom of the other.
- The connectors in the legs have a 0.25mm fit tolerance in although to achieve a tight push fit.
- Place the NARROW side of the leg where the connector peg is flush with on the print bed for maximum shape accuracy.
- If the connectors end up too big… that's why you need a file with 3d printing! 🤣
- Remember to set a decent amount of infill (15%, cubic) and top layers (I used 4) for a good finish on the plate.