Profile mount for Virpil CM2 base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows mounting a Virpil Mongoose CM2 base to a piece of upright 40x40 profile.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 65
- Makes
- 0
- Views
- 827
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
This allows mounting a Virpil Mongoose CM2 base to a piece of upright 40x40 profile.
The profile is offset enough to connect the 5 pin din connector, but not the AUX connector which is directly behind the profile. There is also a USB cable support.
I printed with 2mm top and bottom and 6 perimeter walls with 15% infill. It takes a while to print, but is very solid. PLA is working well for me so far.
Hardware:
4 x M5x30mm socket head bolts ( attach to the Virpil base )
1 x M8x16mm socket head bolt ( bolts straight down into 40 profile threaded hole )
4 x M8x16 bevel head bolts ( attach to the sides of the profile)
4 x M8 T-nuts
The top M8 bolt requires that you tap threads into the end hole of the 40x40 profile.