Raspberry Pi Backlit Logo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi Logo that is Backlit and only lights up when office lights are on.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 34
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I wanted a backlight Raspberry Pi Logo for my work bench at work. I thought it would be fun to have one since we use a lot of Raspberry Pi for random things in my job and I mainly work on them at my bench.
I made this model using Fusion 360. It is powered with a Raspberry Pi Pico W and it only turns on when my work bench light is on.
The following is what I used for this product:
For the shell of the logo - Prusament PLA Prusa Galaxy Black
Leaves Insert - Transparent Green HATCHBOX PLA 3D Printer Filament
Berry Insert - Transparent Red HATCHBOX PLA 3D Printer Filament
1 - 10K ohm Resister
1 - Mini Photocell
-----------------------------------------------------------------------------
Wiring Diagram:
---------------------------------------------------------------------------------------
Code:
import machine
import neopixel
import utimenp = neopixel.NeoPixel(machine.Pin(0), 8)
photo_pin = machine.ADC(26)
n = np.n
while True:
val = photo_pin.read_u16()
val = val / 100
print(val)
if val > 400:
for i in range(n):
np[i] = (0, 0, 0)
np.write()
utime.sleep(.25)
else:
for i in range(n):
np[i] = (255, 255, 255)
np.write()
utime.sleep(.25)
</code></pre>