YAS - Yet Another Bed Scraper
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.61 – €0.75 net (excluding VAT)
For file: YAS - Yet Another Scraper_0.4n_0.15mm_PETG_MK4IS_38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.68 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 38.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
There's a lot of scrapers on printables.com - but this is my version.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 1
- Views
- 128
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
There's a lot of scrapers on printables.com - but this is my version.
As always, there's a balance between higher heat (promoting better layer adhesion) and lower heat (reduced stringing, especially with PETG). For me, scrapers should really focus on being mechanically strong, so higher heat and using PETG is typically a good idea - but that causes visual problems e.g. the stringing. So this model was ultimately designed to be printed at higher heat, but being easy to clean-up afterwards (so, no small details or hexagons).
As pictured, Prusament PETG Matte Black. I used 30% infil with my seam position set to “Rear” (to avoid the seam being generated on the scraping portion). I recommend at least 3 walls.
The Fusion 360 model should be clean enough to make your own modifications (e.g. changing the size, angle of the sharp bit, etc.).