DUMMY 13 goes to COMIC CON - Captain America V1.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A costume for DUMMY 13
- Rating
- 5 / 5
- Likes
- 407
- Downloads
- 1,618
- Makes
- 5
- Views
- 6,399
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Standard Digital File License
04. May 2024 V1.1:
- Multi plate 3MF file for Orca slicer, Bambu Studio
- Improved mask for better printability
11. Nov. 2023:
- First release
Based on DUMMY 13 Beta - Oct. 2023
| DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 |
Get your Dummy 13 here: /model/593185
DUMMY 13 loves COMIC CON!
So I have started to design a whole series of characters and costumes for DUMMY 13. This is another costume from the series "DUMMY13 goes to COMIC CON".
The aim is to preserve the charm and simplicity of Dummy 13.
Have fun!
BE WARNED!
These parts are challenging as they are very filigree. You have to work with a scalpel, magnifying glass and need a well-tuned printer. So please don't blame me if you are not successful. But your efforts will be rewarded (see pictures)
Now to the content of CapDUMM America, sorry Captain America:
- Mask with inlay
- Shield
- Multicolored abdomen. The pins are to ease the positioning. Use glue.
- Other parts are standard parts that are just printed in different colors (see pictures)
Get more:
- More outfits /@Mici/collections/967681
- More weapons /@Mici/collections/1103020
- More hands /@Mici/collections/1103017
Print:
- 0.10mm layer height defalut
- 0.08mm layer height for the tiny and shield parts
- Use “Arachne” as wall generator
MASK:
Slide the head into the mask and press it in with gentle force on the chin.
If this is not possible, it is probably due to the following points:
- Check the inside of the helmet (the top) to see if it has been printed cleanly and remove any filament debris that is sticking out
- Has the brim been removed cleanly?
- The elephant foot can cause the inner rim to be a little too narrow, just sand the inner rim down a little or work it with a knife
![]() | ![]() Use glue. |
Postprocessing:
- Sand the shield smooth
- Use some clear coat/varnish
- Admire your work and have fun!

