Strong Feet for Vileda Laundry Tower Drying Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sturdy foot for the Vileda tower drying rack, as the thin feet with rollers cannot withstand a full load for long.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 0
- Views
- 281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
I don't know how you feel about the Vileda tower drying racks, but if you really put a lot of weight on them, their feet can't take it for long. That's why I built this foot to solve the problem once and for all. It is compatible with the following “Vileda Mixer 4 Tower Drying Rack”:
https://www.amazon.de/gp/product/B08D3C6M3L/
Each side of a foot consists of a total of two parts: The basic structure and a reinforcing grid between the screw connections. While the basic structure can be printed with low infill, I would print the reinforcement grid with 100% infill. Thus, a solid ring with 100% infill always runs around the clothes rack tube like a clamp and can be firmly tightened with the respective screws. The 3mf file already has these settings preset.