Butterfly Specimens - Realistic Presentation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Butterfly Specimens - Realistic Presentation
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 85
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an artwork made using HueForge, which realistically presents butterfly specimens.
Suitable for this 150x150mm frame. https://www.printables.com/model/643762-frame-150x150-for-hueforge-and-other-150mm-artwork
This artwork requires three colors of filament: black, white and gray.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #11 (0.96mm) swap to Jade White for the rest.