1 / 3
Yoton Projector Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple ceiling mount to attach the Yoton projector pointing down so it can be used for cutting sewing patterns.
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 739
- Makes
- 3
- Views
- 4,502
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Easy way to mount a Yoton projector from the ceiling pointing down so it can be use for cutting patterns. The 2 screw holes and knob give you some wiggle room to align the projector with your cutting table. I attached mine to the drywall ceiling using drywall anchors.
Additional pieces needed:
- 1 x 1/4-in x 1-in carriage bolt - This bolt will screw into the projector, the length is important to be able to tighten the knob. (¼ inch diameter, 20 threads per inch, 1 inch long)
- Friction pad - Use the provided template to cut a out a piece of craft foam, or use something else to provide enough friction to hold the projector in place (felt, fabric, cardstock, …)
- 2 x #10 washers - 1/2 inch diameter washers to spread out the pressure from the screws
- screws and anchors - to attach to your ceiling
Printed on Ender 3 Neo:
- 0.2mm layer height
- 3 walls
- 20% infill
- skirt
- Overture Cream PLA - white
- Arm printed with no supports
- Knob printed with tree supports