1 / 3
Pursa Bear MK3S Hotend Fan Vent
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make sure the airflow from the hotend fan is blowing upwards, and DO NOT COOLING THE PRINTING PARTS.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a Hotend Fan Vent, I made this fan vent for Pursa Bear, should also work on MK3S.
The screw clamps is extremely tight, so installing this part is not very easy.
Thickness of this part is 2.5 mm, you can easily change the thickness in PrusaSlicer.
Printer: Prusa Bear (I3 MK3S)
Rafts: No
Supports: No
Resolution: 0.3
Infill: 15%
Filament: PETG