Smurfette layered - keychan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4 Colored Smurfette keychain - my first job
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 172
- Makes
- 0
- Views
- 540
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My first 2D model created using online onshape, where each color has its own layer. So it is possible to print in color on any printer.
The dimensions of the Smurfette are 120x67x4.2mm
I didn't have blue filament at the moment, so we colored it manually with a marker.
If you would like, you can paint the dress and the cap red, as in the story "Smurfette Star".
But the current model is set automatically to change color in Pruša slicer only for 4 colors.
Dia Keychan is 6mm
the heights of the levels are:
black 3mm
blue 0.4mm
yellow 0.4mm
white 0.4mm
Print Settings:
Printer:Any
Rafts:No
Supports:No
Filament brand:Any (my Aurapol)
Filament color: Black, Blue, Yellow and White (Red marker)
Filament material:PLA
Notes:
0,2 mm layer
0.4mm nozzle
3 perimeter
15% infill
1 mm retraction
0.4 Z-hop
50 perimeters speed
215C temp for first layer
200C temp hotend