1 / 3
Prusacaster - Remix for Telecaster Two kit from Blackbeard's Den
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix for the Telecaster two kit from Blackbeard's Den
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 110
- Makes
- 0
- Views
- 1,911
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Guitar kit parts from TL2 kit at Blackbeard's Den
- 3x M3 threaded inserts for bridge
- 3x M3 bolts for bridge ~30mm
- 10x M4 threaded inserts for body optional
- 10x M4 bolts ~25mm optional
- 8x small screws for pickguard (used the ones that came in the kit)
- Roll of double-sided copper adhesive tape (for cavity isolation) optional
- Glue to join body parts (I used Gorilla Glue, sparingly)
I strongly advise printing out a few minimal test prints to save yourself time and money:
- a cut-out section of the neck of MainBody to check the neck/body fit
- a version of all parts with just the top few layers to check overall alignment
I printed most parts as 7 perimeters, with a 0.6mm nozzle, using Prusament PLA, or eSun PLA+, with eSun SilkPla for the pickguard. I had to shave down the elephant's foot that I forgot to compensate for, as a result of the high perimeter/top/bottom layer count.