1 / 1
Parametric Table Soccer Ball Starter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small device to mount on a table soccer (foosball, table football) set, in order to easily and fairly start the ball.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 77
- Makes
- 2
- Views
- 400
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- GNU General Public License v3.0
Introduction
Received a Wooden Tabletop Football (a.k.a foosball, table soccer, table football) set as a gift recently, but noticed an absence of consistent and fair ball starting method.
Design
- Modelled in Fusion360
- Parametric
ball_diameterfor the diameter of the ball (design automatically adds 2mm to this number for the hole size)table_wall_thicknessfor the thickness of the wall to mount this device - recommend adding 0.3-0.5mm clearance to account for material shrinkage depending on filament
Printing
- Print as downloaded, should be top-down (upside down)
- Brim recommended if your printer goes fast, I used 5mm
- Recommend PrusaSlicer auto supports at 60°
- Only really necessary at 40° but recommend 60° for abundant smoothness of the chute
- 4 walls, 5 top and bottom shells, 15% rectilinear infill
Remixing
- Fusion360 file included in this listing
- Fully parametric as mentioned above
- Please be mindful of copyleft licensing and re-upload any remixes to this site