Replacement Comb for Philips Hair Trimmer HC7460
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement comb for the Philips HC7460/15 Hair Trimmer, length 7-24 mm
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 319
- Makes
- 5
- Views
- 2,384
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
A replacement comb for the medium-length comb (7-24 mm) for the Philips HC7460/15 Hair Trimmer. The original part on my machine broke and is nearly impossible to glue, so I whipped together this printable replacement. Tested it, and it works just as well as the original.
A brim is strongly recommended for this print. When printing the rails, I recommend using variable layer height with thinner layers for the slopes. PLA is perfectly suitable; I used Prusament Pearl Mouse.
After printing, simply glue the rails in place, e.g. using epoxy glue. Make sure the rails are on straight; I inserted them half way into the machine while the epoxy cured.