Night Vision Critter Camera MotioneEYE Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry PI 3B purpose built cam with articulating Camera stalk
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a camera that would capture motion with 30 seconds before and 30 seconds after so that I could monitor creature activity in a crawl space. All the trail cameras I had would only take 10 second shots and by the time the motion started, the subject was already out of frame. MotionEYE with a RaspBerry PI3b did the trick.
HiLetgo NV Camera is what I used for this design. This camera does not fit any of the other designs I found on the web.
The camera enclosure is designed to leave space and opening for air to circulate on the IR lamp heat sinks. Without this I noticed degredation in IR luminance. A path for the
I used heated brass inserts for this and M3 Screws.
Note: much of this final assembly and CAD work was done inside the slicer. As an example, the top notch for the ball I had to cut off in Orca Slicer and print the ball separately then attach it with M3 Screws and glue. While not elegant. It worked. There are enough variety of parts here for one to mix and match to their won liking. This is more of a kit than a finished product.
Brass inserts: https://a.co/d/ak3QvM3
Variable lengths of Flex Cable used(black): https://a.co/d/2Y6DMIP
MotionEye Project with Raspberry Builds: https://github.com/motioneye-project/motioneye
