Twisted Planter with Legs, Vase Mode
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Twisted Planter with Legs, 3D printable in just 5 hours.
- Rating
- 5 / 5
- Likes
- 244
- Downloads
- 841
- Makes
- 15
- Views
- 3,686
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A Twisted Planter with Legs, 3D printable in 2 parts. The planter is designed to be printed in vase mode and the legs without supports (to save you some time :)).
For indoor and outdoor use.
I would suggest to connect the parts with some glue or double sided tape.
Scale as you like, please don't forget to scale both parts if you do ;).
Print settings
Part 1: Planter - vase mode
Nozzle size: 0.4, 0.6, 0.8
Layer Height 0.2mm
Layer Width/ thickness: 0.6, preferably 0.8 or 1mm (using a larger nozzle)
Print speed: 45mm/sec
Vase Mode enabled (aka Spiral vase in PrusaSlicer and Spiralize Outer Contours in Cura)
Print time: 2.5 hours
Material: PETG
Part 2: Planter Legs base - normal mode
Nozzle size: 0.4, 0.6, 0.8
Layer height 0.2mm
Layer width/ thickness: 0.4
3 Perimeters
10 - 15% Infill
Print speed: 45mm/sec
No supports needed (print with legs up)
Print time: 2.5 hours
Total print time at 100% scale (~9 x 11 cm): 5 hours
Happy printing.