1 / 2
Shapeheart base riser for O2Feel Peps N3 2016 — image 1
1 / 2

Shapeheart base riser for O2Feel Peps N3 2016

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A riser for the Shapeheart bike base, for the O2Feel Peps N3 2016 folding bike

Rating
0 / 5
Likes
0
Downloads
11
Makes
0
Views
121
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The O2Feel Peps N3 2016 folding bike as a very loaded handlebar, with tiny space for a large smartphone to be attached atop a Shapeheart magnetic base (elastic band).
I decided to remedy this issue by creating a fitting riser which will bring the magnetic base closer to the center of the handlebar, while rising it up for the smartphone to clear the screen, the handlebar quick release and the bell.

This riser is designed to be attached to the bike using a single small zip tie (less than 1.5mm in thickness and 3.5 mm in width). The Shapeheart magnetic base can also be attached using small/medium sized zip ties, as seen in the photos. I haven't tried to use the provided elastic bands as they don't fill me with confidence ^^'

Print recommendations:

  • PETG or ASA for strong weatherproofing and UV resistance (prefer black for PETG)
  • 3 walls, 10-15% infill
  • No support needed

Tags