1 / 1
Espresso Leveler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Espresso Leveler for 54mm Portafilters
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 244
- Makes
- 1
- Views
- 2,096
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
This is a multi-part object.
After opening as mulitpart object remove the “Gummi” to print the grip and the leveling surface. As they are two objects it is quite easy to use different colors. I used PETG and a steel nozzle to be as much food-safe as possible.
Then print the “Gummi” in TPU.
No fancy print settings.
- no supports
- layer hight: 0.2-0.3mm (or if you want to sand less even finer)
- 5-10% infill
- 3-5 perimeters
- 4-6 bottom top layers
- for the TPU ring you might want to print slower (depends on your setup)
The TPU ring can be slipped over the grip (it is designed quite tight.