Skadis Hooks for Duro Screwdriver Magnet Bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hang your magnet bar from Aldi, Lidl, etc to a SKADIS pegboard
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
There are lots of magnet bars for hanging up screwdrivers temporarily on sale at Germany's Aldi or Lidl. The existing solutions for hooking these bars to an Ikea SKADIS pegboard did not fit my bar from the DURO brand, so i designed my own.
The height of the bar is 26mm and the length is 460mm. According to the length and the location of the screwholes (they are not standardized) you may need to modify the hook. Please have a look at the original design at https://www.tinkercad.com/things/gF8t7rfvTZA - you may need to move the hook part up and down according to your bar.
From my experience with these magnet bars, you will need two of this part (obviously) and move the hook part either fully to one side or to the mid, like it is in the downloadable OBJ file. You may have to experiment.
Print time is around 1 hour per hook, so no problem with experimenting.
You will need M4x16 screws with a cylindrical head, as well as washers and nuts.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Category: Organization