1 / 3
Voron 2.4 FulaBed extensions (300mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rail adapters to fit a Fulabed on the stock Voron rails (300mm)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The standard bed rails on the Voron are too narrow to accommodate a FulaBed and rather than completely redoing the electronics bay/configuration I decided to design some extensions.
These simply bolt onto the side of the stock rails to provide mounting holes ~15mm wider on each side.
They are designed to use a M5 heat set insert on the side with the beveled hole. This side should be on the bottom when installing.
Parts
M5 x 25 Flat Head Screws (4) - For the bed
M5 Heatset insert (4)
M5 x 10 Button Head Screws (8) - To mount to the rails
M5 T-nuts