Strong Furniture Shelf Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.02 – €6.13 net (excluding VAT)
For file: strong-furniture-shelf-braket_6mm_holes_0.6n_0.2mm_PLA_MINI_4h56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.57 excluding VAT (range midpoint).
- Weight reported by the author
- 83 g
- Print time reported by the author
- 4.94 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Attach your shelf to the wall!
- Rating
- 0 / 5
- Likes
- 104
- Downloads
- 582
- Makes
- 1
- Views
- 1,606
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Never let your shelves sag again with these strong and stylish furniture shelf brackets. Optimized for the Prusa Mini, these brackets are easy to print and will provide sturdy support for your shelves.
Features:
- Strong and durable design
- Optimized for Prusa Mini
- Can be printed vertically or horizontaly
- Easy to print
With these brackets, you can keep your shelves looking their best and prevent them from sagging under heavy loads.
Print tips
- You can use basically any common material such as PLA or PETG.
- Set infill to square under 45° angle
- Set infil to 30%
- Set wall thickness to 3 layers
Variants
- 6 mm wide screws (with 6.4mm hole clearance); 175mm x 175mm
- 5 mm wide screws (with 5.4mm hole clearance); 147mm x 147mm
Support me
"If you dig what I'm creating and want to support the journey, consider fueling my creativity with a virtual coffee! Your support goes a long way in helping me continue pushing the boundaries of 3D printables. Want to Buy Me a Coffee?
Enjoy your Furniture Bracket and let me know, if you make one for yourself!
Designed with Autodesk Fusion 360 Personal