1 / 6
Sea-Doo Drain Spacer for transducer cable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This spacer allows cable entry into the hull via the existing drain hole.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 118
- Makes
- 0
- Views
- 719
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
WARNING: USE AT OWN RISK. Using this spacer may compromise your hull and sink your ski. You have been warned.
Some notes:
- Printed with PETG at 100% infill.
- Designed with the Garmin GT56 transducer cable in mind.
- If the hole for the cable is too small, you may need to clamp the spacer between two blocks of wood and run a 7mm drill through cable hole (7mm is approx. the diameter of the Garmin GT56 transducer cable).
- The recess around the screw holes allow for a flush fit against the hull (as the hull bulges slightly around the screw holes)
- There is a small channel to run a good bead of Sika 291 sealant.