EV Charge Cable Festoon
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.00 – €1.22 net (excluding VAT)
For file: arch_0.6n_0.3mm_PETG_MINI_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.11 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 52.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cable festoon system I designed for my EV charging cable to provide strain relief.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 0
- Views
- 996
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Cable festoon system I designed to provide strain relief for my EV charging cable hanging overhead.
Truthfully I would make the radius of the support arch larger but I am printing on a Prusa Mini+ and this is close to as big as it can make, but it should be fine. You can scale it up if needed and you have that option. If you have a more flexible cable like the Tesla mobile connector there is likely no need to scale it up anyway.
You will need supports at least for the top mounting ear, and likely will also want a brim to keep it adhering to the build plate.
For anyone that is curious, this is the flexible ceiling track I am using, and this is the spring balance I am using. I have had one of the rollers pop off when I pulled hard on it once so I have taken to doubling up rollers on the ends that support the most load.