1 / 5
Corner Cable Wall Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small corner cable fixing clip
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 89
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a small cable clip that would fix one or more cables into the corner of a room.
I've used it to fix single and double drops of CAT6a cable, but you may need to experiment to see if your cable is held sufficiently tight or not for this clip to be useable.
The thru hole is sized to accept a 2.5mm wide zip tie.
I used 3M VHB tape to fix the clips to the wall.
Printing
I printed the clips with 3 perimeters and 40% Cubic infill.
You could reduce the infill but the difference in filament used is minimal.
(40% - 1.74g vs 10% - 1.67g)
Filament
eSUN Ice White PLA