1 / 1
protoxtruder + diamond mount adapter plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
protoxtruder adapter plate for the diamond mount in a SP5 printer
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
because the motor sits so low with the protoxtruder, the lower part hits the metal top plate.
By raising it more than approx. 2.5mm everything has enough clearance.
(usually the extruder is mounted the other way but in my case a drag chain is in the way)
diamond mount: https://www.printables.com/model/169465-the-diamond-mount
protoxtruder: https://www.printables.com/model/436425-protoxtruder