3S6P 18650 Fits 2P nickel strips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simple battery holder for 18 batteries
- Rating
- 3.667 / 5
- Likes
- 25
- Downloads
- 319
- Makes
- 2
- Views
- 1,491
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
This is a simple battery holder for a battery pack. 3S = 3 batteries in series giving 12v, 6P = 6 batteries in parallel, increasing the storage capacity. If the battery box could hold more I would've gone with an 8P.
I'm converting my 12v 11Ah lead acid battery to lithium ion battery pack for my motorcycle.
I have seen a few of these on here but the 2P strips don't fit on them so I quickly through this together. I found those strips to be quicker when assembling the battery pack.
I think the hardest part is designing it to fit different 18650 batteries. 18650 stands for 18mm diameter and 650mm length. I quickly realized these measurements are loosely followed by different manufacturers.
I printed these in ASA. ABS would be about the same. I'm not sure how hot the battery pack will get so I didn't want to use PLLA, or even PETG, in case it melts or distorts the holder when in use. I'm sure those will be ok to use but I didn't want to take the chance. Especially since it'll be sealed and I won't be able to gain access to it after the case is put back together.
I've included the .blend file.
Here's the video I followed for making the battery pack.