RC 1/10 buggy-truggy rim
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rc 1/10 standard buggy / truggy wheel. width : 50mm inner tyre diameter : 58mm 2 holes for air pressure standard hex…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
22/06/2025 : add some other wheels size for buggy/crawler
tip : print with the face downside and touching bed support for the center hub.
Rc 1/10 standard buggy / truggy wheel.
width : 50mm
inner tyre diameter : 58mm
2 holes for air pressure
standard hex mounting 4mm depth
Instructions
be careful at the beginning of the print because of some slope being less 45°
take 3hours (feed rate 23mm/s) on an huxley with 0.5mm nozzle and 0.33mm layer (infill 0.2 rim weight 26gr)
Not yet tested on track but fit well the car.
Ask if you want the solidwork source.
17/07/2012 : new version better/easier and faster to print.
06/02/2013 : added a 72mm as asked.
Category: R/C Vehicles