Eyecup for Sony Alpha 7cII viewfinder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.24 – €0.29 net (excluding VAT)
For file: eyecap_ilce_a7cm2_0.4n_0.1mm_PETG_MK4IS_20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.26 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 19.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
well ... it's an eyecup for the Sony Alpha 7cII viewfinder ...
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 119
- Makes
- 1
- Views
- 571
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
I print it with support enforcers below the inclined section at the caps downside - but might as well work with bridging. I use PETG as base material for the lower section to ensure enough stiffness and Flex as material for the cup. To simplify things I use the color change function of prusa slicer and print the Flex also with PETG settings - results not in an optimal surface but works … happy printing and feel free to improve!