1 / 4
Tramming Tool for CNC
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Square the router / spindle to your spoilboard or workpiece
- Rating
- 3.5 / 5
- Likes
- 41
- Downloads
- 258
- Makes
- 2
- Views
- 1,320
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Square the router / spindle to your spoilboard or workpiece (assuming they are flat).
Requires these parts:
- Two of these dial indicators
- a (bit of) 6mm metal rod.
How to use:
- Insert rod into your spindle / router and tighten.
- Gently lower the spindle / router and check for level. Adjust your spindle mount if necessary to have both dials react simultaniously / equally when in contact with the spoilboard.
- Now redo the process after rotating the tool 90 degrees.
Your spindle / router is now square to your spoilboard.