Screw Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: screwholder-round-shaft_0.4n_0.2mm_PLA_MK4IS_10m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 10.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Now you can easily drive screws with one hand. This is a remix (see below) if you have a short bit in an extender.
- Rating
- 5 / 5
- Likes
- 479
- Downloads
- 1,807
- Makes
- 24
- Views
- 5,594
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a remix of a model by @LoboCNC. The original screw holder is quite universal: it fits many hand screwdrivers as well as standard hexagonal bits.
My problem was that I have some short hexagonal bits that I still wanted to use but the standard round extender they fit into was too big for the original screw holder.
This model is slightly larger than the original. Just making a round hole left walls that were way too thin.
You don't have to choose one of them: print both and all your needs will be addressed .
Printing:
- Print flat as it lies in the pictures.
- No supports are needed even if your printer doesn't bridge too well.
- As per original suggestion, PLA works perfectly. PETG should too.