Doominator Mod Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Better priming handle and barrel inserts for Nerf Doominator to improve performance and reliability
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
I put this kit together with a spring upgrade, I don't know how the tighter barrels will perform with the weaker stock spring.
The barrel inserts pressure fit, might need some hammering but no glue required. They only cover the last ~10mm of the barrel but it stops air leaking around the edges of the dart and improves accuracy from my tests. Plus you can shoot half or full length darts.
The new priming handle replaces the existing piece, slides over the rail, and requires 2 M4 screws to secure. One side of the screw holes is bigger: wrap some electrical tape around the screw threads towards the head to add width, then insert them from the larger side. This ensures less wiggle on the part it attaches to.