Economical Resistor Storage Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rack for very-low-filament-usage storage tubes designed to fit through-hole resistors.
- Rating
- 4.9 / 5
- Likes
- 159
- Downloads
- 855
- Makes
- 14
- Views
- 3,407
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I spent a long time trying to find a good way for stroring resistors but couldn't find anything that was both easily accessible and small enough to fit into my drawers upright.
Each tube is 64 mm tall, so it fits in e.g. an IKEA Alex drawer and uses only about 3g of filament incl. the lid.
The lids are held in place by little notches, so they won't come off accidentally and spill your resistors everywhere.
Rack Size
A few different sizes for the rack are provided as stls but any arrangement can be generated via the OpenSCAD file. Do note that the preview doesn't seem to work for the rack, but rendering will.
Printing Instructions
For the tubes and lids, it is crucial to print them with a line width of 0.6mm (fine for both 0.4 and 0.5mm nozzles) so that walls are exactly one perimeter thick.